Battery Backup Dynamic UPS (UBT+ with Battery)

Natural sinus signal obtained without using semiconductor material
-%50,+%15 wide input voltage tolerance
±%5 input frequency tolerance
Up to 97% efficiency
99% harmonic suppression under all conditions
Input current harmonics below 3%
Unlimited crest factor
High short circuit resistance (14xln)
Input power factor 0.99
1 hour at 110% load, 2 minutes at 150% load
100% Galvanic isolation
850 thousand hours MTBF period
25 years operating life
Low maintenance costs
Low operating costs
40% low battery usage
Natural ventilation
Ability to provide full capacity output even at capacitive power factor
Compatible with BMS and many communication systems
Container cabin solution option
Water cooled solution option

Continuous and clean energy source dynamic uninterrupted The most important feature of power supplies is that they have a unique synchronous machine that produces natural sine wave independent of the network. UNIBLOCK-T+ with Battery is a model with battery backup structure. This product, which has a solution capacity in MV and LV conditions, is produced between 625kVA-1670kVA as a single without paralleling. When you prefer Dynamic UPS with battery backup; needs such as compensation panel and air conditioning will be eliminated. A much more efficient, high-quality, safe and long-lasting solution will be obtained with a single system.

Thanks to the three-legged shock coil called MAGIC CHOKE, it provides decoupling by suppressing current harmonics from the load to the network, isolating voltage harmonics from the network to the load and limiting short-circuit currents directed by the network.

Under dynamic load conditions, even in sudden peak currents, the voltage generated from the network independent synchronous motor allows you to obtain a noise-free and natural sine wave at the UPS output.
Short circuit currents occurring on the load side are eliminated up to 14 times the nominal current, ensuring the continuation of selective critical load operation.

Battery operation is used only during power outages and thanks to the much lower AC ripple, the life of the batteries is 40% longer.
System ventilation is provided naturally thanks to the industrial fan integrated into the UNIBLOCK synchronous machine. There is no need for an additional air conditioning system.

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

3 Phase Input – 3 Phase Output

From 100 kW to 12.8 MW

-Fully configurable, quickly expandable,

-High efficiency

-Modularity

-Low total cost of ownership

-Maximum efficiency 99.5%

-Maintenance and power increase without switching to bypass

-High power density

-4 Level Modularity:
Removable power modules for easy maintenance and low MTTR
Unit modularity for easy and flexible growth
System modularity to grow your business from 12 MW to more

-Configuration options:
Central Static Bypass,
Distributed Static Bypass,
Common (Central) Battery,
Modular Battery (optional)

-4 operating modes:
Double High Efficiency
Very High Efficiency
ECO mode
Ultra High Efficiency)

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

3 Phase Input – 3 Phase Output 10kVA – 60kVA

– High efficiency 95%
– Low electricity consumption,
– 3-Step smart charger,
– Long battery life
– Approximately 0.5 m2 area usage,
– Minimum volume,
– Easy installation,
– Power increase with 2.7/3.4/5 kVA modules,
– Redundant power modules,
– Control modules, battery modules,
– Maximum reliability,
– Easily replaceable modules,
– Low maintenance cost,
– 4 different configurations up to 20 KVA power
(3F-3F/3F-1F/1F-1F/1F-3F)

You can view the details by clicking on the PDF icon for product technical specifications and details, download the file or send it to the address you want via e-mail.

“Real On-Line “Double Conversion” Technology
DSP Controlled, IGBT Rectifier UPS
3 Phase Input / 3 Phase Output 10 – 300 kVA

– IGBT rectifier
– IGBT Inverter
– DSP controlled processor
– Active input power factor correction, PFC (PF 0.99)
– Active harmonic correction (THDI ≤%4)
– Wide input voltage range
– Compatible operation with generator
– Energy saving mode (ECOMODE)
– Backup and power increase thanks to paralleling feature
– Smart battery charging system
– Easy synchronization with external sources
– Static and manual bypass as standard
– Standard isolation transformer
– Communication with computer and network systems (SNMP)
– Extendable battery feeding time
– Low installation and operating cost

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want You can send it via .

“Real On-Line “Double Conversion” Technology

-DSP Controlled, IGBT Rectifier UPS

-3 Phase Input – 3 Phase Output / 10 – 40 kVA

-IGBT Rectifier & Inverter

-DSP controlled processor

-Active input power factor correction, PFC (PF 0.99)

-Active harmonic correction (THDI ≤ 3%)

-Wide input voltage range

-High output power factor (0.9)

-Start feature from mains or battery (Cold Start)

-Backup and power increase thanks to paralleling feature up to 4 units

-Common battery usage and smart battery charging system

-Battery charging depending on temperature (option)

-Energy saving mode (ECOMODE)

-Transformerless design

-User friendly LED/LCD display panel

-Static and Manual Bypass

-High charge current

-Temperature controlled smart fan speed regulation

-Standard RS232, USB, RS485 (ModBus ),

-Dry Contact and EPO communication

-Communication with computer and network systems (SNMP)

-Extendable battery feeding time

-Low installation and operating cost

-2 year full warranty in accordance with ISO 9001, ISO 14001 and CE standards

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.