You are here:
Showing 209–224 of 441 results
Ürünler
Features and Benefits
• IP55 rated with foamed in seals in panels and doors.
• 800 x 800mm footprint.
• 42U in height (2000mm).
• Manufactured from sheet steel.
• Panels are dipcoat powder painted to RAL 7035.
• A plinth is available to mount the rack (additional 200mm height).
• 19” mounting rails are supplied in the front and rear.
• Rack is supplied with front and rear doors.
• Supplied with steel doors or one steel door and one glass door.
• Supplied fitted with a four point latching locking bar and lever handle.
• The racks are bayable on all sides.
• Can be supplied pre-fitted with Prysmian Rack Mounted Products.
Technical Data
• Required space envelope (mm): 820 (w) x 875 (d) x 2010 (h) (maximum dimensions including handles)
• Material: Sheet Steel
• Thickness:
• Frame 1.5mm
• Rear Panel 1.5mm
• Roof 1.5mm
• Door 2.0mm
• Gland Plate 3.0mm
• Mounting Plate 3.0mm
• Finish:
• Frame: Dipcoat primed
• Door, Roof and Panels: Dipcoat primed – powder coated and textured RAL 7035
• Mounting Plate and Gland plate: Zinc Plated
• Sealing: IP55 Panels and doors have foamed in seals
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The rack can accommodate the range of SRS3000 shelves
and sub-racks. Please note that other 19” rack mounted
products and equipment can be mounted into the RS3000
rack. Refer to the other products within the OAsys range.
• SRS3000 shelves and sub-racks are available in 1U, 2U or
3U formats.
• Up to 45 single (1U) SRS3000 shelves can be accommodated
in the 47U rack, providing a capacity of 2160 fibres on a
patch only basis.
• The rack is supplied fully configured as a composed rack
with side channels, doors, 19” mounting rails and patchcord
storage mandrels.
• Patchcord storage drums are supplied in the left hand and
right hand side of the rack, for patchcord storage and bend
management..
• The rack is suitable for patch only shelves only as no cable
management brackets can be fitted.
• Locks are available for restricted access to the rack. Order
lock separately XKTSC00353.
Technical Data
• Maximum Capacity:
• 47U: 45 SRS 3000 shelves (1U)
• Maximum Fibre Capacity:
(using SRS3000 products)
• 47U: * 2160 (patch only with SC and LC connectors)
• 47U: * 1080 (patch only with FC, ST and E2000 connectors)
• Required space envelope (mm):-
• 47U: (h) 2200 x (w) 900 X (d) 300
• Material: Mild Steel
• Finish: Painted light grey (RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A modular rack system for use in the exchange or communications
room.
• The rack is made up of vertical pillars which can be assembled
together to achieve the required capacity.
• Each vertical pillar can accommodate up to 6 sub-racks.
• Two types of sub-rack are available – splice and patch (Network)
and patch only (Equipment).
• Network sub-racks are supplied with SC/APC pigtails and adapters.
Equipment sub-racks are supplied with SC/APC adapters.
• Each sub-rack contains six module trays. Each module tray houses
two 12 fibre splice trays. Each module tray can accommodate up to
24 fibres and 24 pigtails and adapters.
• The total capacity of each sub-rack is 144 fibres providing a total
capacity per rack pillar of 864 fibres.
• Network cables are terminated using cable breakout units (BEMS)
which are anchored to cable anchor plates located on the network
rack pillars.
• Equipment patch cords or pre-terminated cables are anchored to
cable anchor plates located on the equipment rack pillars.
• The racks have multiple built in raceways for patch cord routing
and bend management.
• The rack is constructed of steel powder coat painted black.
Technical Data
• Sub-Rack Fibre Capacity: 144
• Sub-Rack Connector Capacity: 144 x SC Type
• Pillar Sub-Rack Capacity: 6
• Pillar Fibre Capacity: 864
• Pillar Connector Capacity: 864 x SC Type
• Pillar Dimensions: (h) 2240 x (w) 540 x (d) 500
• Four Pillar Rack Dimensions: (h) 2240 x (w) 1700 x (d) 784
(as per photo on page 1)
• Material:
• Pillar: Mild Steel
• Sub Rack Mild Steel
• Splice Trays: FR ABS
• Perimeter Kit: Mild Steel
• Finish:
• Pillar: Painted Black
• Sub-Rack Painted Grey RAL 7035
• Splice Trays: Grey RAL 7035
• Perimeter Kit: Zinc Plated
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 13.0 mm (0.51 in)
Dielectric: Cellular polyethylene Ø 32.2 mm (1.27 in)
Outer conductor: Corrugated double side slotted copper tube Ø 35.8 mm (1.41 in)
Jacket: See Jacketing Options table below Ø 39.0 mm (1.54 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Corrugated copper tube Ø 17.6 mm (0.69 in)
Dielectric: Cellular polyethylene Ø 42.0 mm (1.65 in)
Outer conductor: Corrugated double side slotted copper tube Ø 46.3 mm (1.82 in)
Jacket: See Jacketing Options table below Ø 50.0 mm (1.97 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper tube Ø 9.3 mm (0.37 in)
Dielectric: Cellular polyethylene Ø 22.0 mm (0.86 in)
Outer conductor: Corrugated double side slotted copper tube Ø 25.2 mm (0.99 in)
Jacket: See Jacketing Options table below Ø 27.8 mm (1.09 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper tube Ø 13.0 mm (0.51 in)
Dielectric: Cellular polyethylene Ø 32.2 mm (1.27 in)
Outer conductor: Corrugated single side slotted copper tube Ø 35.8 mm (1.41 in)
Jacket: See Jacketing Options table below Ø 39.0 mm (1.54 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Corrugated copper tube Ø 17.6 mm (0.69 in)
Dielectric: Cellular polyethylene Ø 42.0 mm (1.65 in)
Outer conductor: Corrugated single side slotted copper tube Ø 46.3 mm (1.82 in)
Jacket: See Jacketing Options table below Ø 50.0 mm (1.97 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper-clad aluminium wire Ø 4.8 mm (0.19 in)
Dielectric: Cellular polyethylene Ø 12.1 mm (0.48 in)
Outer conductor: Corrugated single side slotted copper tube Ø 13.9 mm (0.55 in)
Jacket: See Jacketing Options table below Ø 16.0 mm (0.63 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper tube Ø 9.3 mm (0.37 in)
Dielectric: Cellular polyethylene Ø 22.0 mm (0.86 in)
Outer conductor: Corrugated single side slotted copper tube Ø 25.2 mm (0.99 in)
Jacket: See Jacketing Options table below Ø 27.8 mm (1.09 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper tube Ø 12.8 mm (0.50 in)
Dielectric: Cellular polyethylene Ø 32.5 mm ( 1.28 in)
Outer conductor: Copper tape with periodic slots Ø 32.8 mm ( 1.29 in)
Fire barrier: Mica tape Ø 33.0 mm ( 1.30 in)
Jacket: See Jacketing Options table below Ø 38.8 mm ( 1.53 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Inner conductor: Copper tube Ø 12.8 mm (0.50 in)
Dielectric: Cellular polyethylene Ø 32.5 mm ( 1.28 in)
Outer conductor: Copper tape with periodic slots Ø 32.8 mm ( 1.29 in)
Fire barrier: Mica tape Ø 33.0 mm ( 1.30 in)
Jacket: See Jacketing Options table below Ø 38.8 mm ( 1.53 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Structure
A 1-layer aluminum-coated polyester tape screen is wrapped on a foamed PE insulation core in accordance with VDE 0207 Part 2 02YI1, with a thickness that meets the electrical properties, on a conductor made of copper wire. After the braided screen made of tinned copper wires is wrapped on it, a black PVC sheath in accordance with VDE 0207 Part 5
YM1 is covered. There is a yellow line on both sides of the sheath surface.
Technical Information
Temperature in fixed conditions: -40 °C, +70 °C
Temperature in mobile conditions: -5 °C, +50 °C
Areas of Use
Used as indoor CATV and CTV distribution cable and as a connection cable in SATV (Satellite antenna) systems where low attenuation is required.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Structure
A 1-layer aluminum coated polyester tape screen is wrapped on a foamed PE insulation core in accordance with VDE 0207 Part 2 02YI1, with a thickness that meets the electrical properties, on a conductor made of copper wire. After the braided screen made of tinned copper wires is wrapped on it, a black LSOH sheath in accordance with IEC 60332-1 is covered. There is a yellow line on both sides of the sheath surface.
Technical Information
Temperature in fixed conditions: -40 °C, +70 °C
Temperature in moving conditions: -5 °C, +50 °C
Areas of Use
Used as a connection cable in indoor CATV and CTV distribution cables and SATV (Satellite antenna) systems where low attenuation is required.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Structure
A 1-layer copper-coated polyester tape screen is wrapped on a foamed PE insulation core in accordance with VDE 0207 Part 2 02YI1, with a thickness that meets the electrical properties, on a conductor made of copper wire. After the braided screen made of copper wires is wrapped on it, a black PVC sheath in accordance with VDE 0207 Part 5 YM1 is covered. There is a violet line on both sides of the sheath surface.
Technical Information
Temperature in fixed conditions: -40 °C, +70 °C
Temperature in moving conditions: -5 °C, +50 °C
Areas of Use
Used as indoor CATV and CTV distribution cable and as a connection cable in SATV (Satellite antenna) systems where low attenuation is required.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Structure
A 1-layer copper-coated polyester tape screen is wrapped on a foamed PE insulation core in accordance with VDE 0207 Part 2 02YI1, with a thickness that meets the electrical properties, on a conductor made of copper wire. After the braided screen made of copper wires is wrapped on it, a black LSOH sheath in accordance with IEC 60332-1 is covered.
There is a violet line on both sides of the sheath surface.
Technical Information
Temperature in fixed conditions: -40 °C, +70 °C
Temperature in mobile conditions: -5 °C, +50 °C
Areas of Use
Used as indoor CATV and CTV distribution cable and as a connection cable in SATV (Satellite antenna) systems where low attenuation is required.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
