You are here:
Showing 353–368 of 441 results
Ürünler
Specification
Cable: 4P 4x2xAWG26/7 S/FTP, flex., 100 Ohm – Outer jacket: Compound free of halogens
A Side: Cat8.2 plug 4P bend relief yellow
B Side: RJ45 plug 4P bend relief yellow
Colours: Grey RAL7035 or yellow RAL1021
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Cable: 4P 4x2xAWG26/7 S/FTP, flex., 100 Ohm Outer jacket: Compound free of halogens
A Side: Cat8.2 plug 4P bend
relief yellow
B Side: Cat8.2 plug 4P bend relief yellow
Colours: Grey RAL7035 or yellow RAL1021
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Specification
Cable: 4P 4x2xAWG26/7 S/FTP, flex. – 100 Oh Outer jacket: Compound free of halogens
A Side: Cat8.2 plug 4P bend
relief yellow
B Side: Cat8.2 plug 4P bend
relief yellow
Colours: Grey RAL7035 or yellow RAL1021
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Specification
Insulation Resistance: >= 500 MΩ
Dielectric Withstand Voltage: 500VAC
Contact Resistance: <= 35 mΩ
Current Rating: 1.5A at 68°F
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Loose tube: Ø2.8 mm jelly filled loose tube with 2 – 16 fibres – Ø3.5 mm loose tube with 24 fibres
Strength member: Waterblocked E-Glass fibre elements
Sheath: 1.0 mm blue FireBur® sheath, UV stabilized, IEC 50290-2-27
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Strength member: Waterblocked E-Glass fibre elements
Lose tube: Ø 2.8 mm jelly filled green colored loose tube with 2 – 12 fibres;Ø 3.5 mm loose tube with 24 fibres
Water blocking: No water on free end (core excl. armouring)
Wrapping: Ø 0.9 mm zinc coated steel wires according to IEC 60502
Ripcord: 2
Sheath: 0.8 mm black Afumex® , Halogen free, flame resistant thermoplastic sheathing compound acc. to EN 50290-2-27, UV stabilised
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Fibre: 2 – 24 ES9 tightly buffered fibres 900 mm ± 50 mm
Strength member: E- Glass rovings
Sheath: 1.1 mm blue FireBur® / LSHF fire retardant, UV stabilized, EN 50290-2-27
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Central strength member: Ø2.5 mm FRP rod
Lose tube: Ø2.3 mm jelly filled loose tubes, with 2 – 12 fibres each, up to 22 tubes in two layers, for lay-up refer to B04
Water blocking: The core is water blocked using swellable tape and tread
Wrapping: Polyester nonwoven
Ripcord: Polyester ripcord for easy slitting of the sheath
Sheath: 1.5 mm blue FireBur®, UV stabilized, EN 50290-2-27
You can view the details by clicking on the PDF icon for product technical specifications and details, download the file or send it to the address you want via e-mail.
Construction
Loose tube: Ø2.8 mm jelly filled loose tube with 2 – 16 fibres – Ø3.5 mm loose tube with 24 fibres
Strength member: Waterblocked E-Glass fibre elements
Sheath: 1.0 mm black LLDPE sheath; IEC 60811; IEC 60708
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Construction
Central strength member: Ø2.5 mm FRP rod
Lose tube: Ø2.3 mm jelly filled loose tubes, with 2 – 12 fibres each, up to 22 tubes in two layers
Water blocking: The core is water blocked using swellable tape and yarn
Wrapping: Swellable tape
Ripcord: Polyester ripcord for easy slitting the sheath
Sheath: 1.5 mm black MDPE, IEC 60811, IEC 60708
You can view the details by clicking on the PDF icon for product technical specifications and details, download the file or send it to the address you want via e-mail.
Specification
Conductor: Bare copper wire Ø 0.64 mm (AWG22)
Insulation: Foam-Skin Polyethylen, Ø 1.6 mm
Twisting: 2 cores to the pair
Cable lay up: 4 pairs
Pair screen: Al-laminated plastic foil around each pair
Overall screen: Copper braid, tinned
Sheath: Halogen free, fire retardant sheathing material; LSHF-FR acc.
EN50289-2-27, yellow RAL 1021
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Structure
A PVC insulation thick enough to meet the electrical properties is coated on the conductor made of copper/tinned copper wire. The bundles formed by twisting the insulated conductors into pairs and 10 pairs into bundles are spun and the cable core is formed with the insulated grounding core and/or a polyester tape with holding and protective properties is wrapped on the core and then a gray PVC sheath is coated on it. The outer sheath thickness shall be in accordance with TS IEC 60189-2.
Technical Information
Temperature in fixed conditions: -30 °C, +70 °C
Temperature in mobile conditions: -5 °C, +50 °C
Areas of Use
Used in indoor automation systems, dry environments, as signal and information communication cables.
For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.
Features and Benefits
• The EC is pre-terminated in the factory to a length of cable using SC/APC
connector. Fully tested, each box is supplied with data for insertion loss and
return loss for each connector.
• The standard cable length available is 40m. Other lengths can be supplied.
Contact Prysmian for further information.
• The «pull» type cable (L1082-1) for duct installation or direct to the wall
installation is LSOH, has a 4 mm nominal diameter, contain one fibre
BendbrightXS (G.657.A2) in a 900 microns buffer, SC/APC pre-terminated.
• The non-terminated cable end is equipped with a pulling eye.
Technical Data – Fibre Termination
• Connector type: SC/APC
• Insertion lost (IL) @ 1310nm and 1550nm : ≤0,35dB.
• Return lost (RL) @ 1310nm and 1550nm : ≥60dB.
• Nominal connector angle SC/APC : 8°
• Operating temperature : from -25 to +70°C
• Testing specification : FT/RD/RESA/06/04/253
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact & attractive design for interior wall mounting.
• Cables can enter unit from rear or bottom.
• All fibres are positively managed to maintain a 30mm minimum
bend radius.
• Optional and removable rear entry cable management.
• Flip tray to allow access to connectorised tails and cable entry.
• Compact, low profile, wall mounted unit used for small and large
business premises.
• Removable cover for easy access.
• Tamperproof cover security screws available as an option.
• Unit manufactured from fire resistant UL94-V0 rated material.
• Patchcords exit unit on bottom face and are protected by two
protection covers.
• Standard colour is white. Other colours available on request.
Technical Data
• Number of input cable ports: 1
• Max input cable diameter (mm): 10mm
• Maximum Capacity: 4 Fibres
• Maximum no. of customer feeds: 4 Patchcords
• Required space envelope (mm): (l) 80 x (w) 120 x (d) 25
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: FR ABS White RAL 9016
• Testing:-
• Optical: Tested 1310,1550 & 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Ergonomic design.
• All fibres are positively managed to maintain a 30mm minimum bend
radius.
• Prevents the accidental damage of optical cables during installation
through walls, and therefore eliminates return to site costs due to
fibre breaks / macro bending.
• Transition point between external grade tubing to Internal low
smoke tubing. Also can be used for transition between internal
walls.
• Gas / Water block facility for a single tube cable.
• Removable cover for easy access.
• Internal unit manufactured from fire resistant UL94-V0 rated
material.
• External unit rated to IP68 when fully resin sealed.
• A 25mm diameter conduit is available as a separate item for
applications where further protection is required around the cable
elements, when they are passed through the wall.
Technical Data
• Number of cable ports: 1
• Maximum cable diameter (mm): 13mm
• Maximum Capacity: 1 Tube (5mm Dia)
• Maximum no. of customer feeds: 1
• Required space envelope (mm): Internal Unit (L) 65 x (W) 26 max x (D) 15 – (1 Tube Cable Version)
Internal Unit (L) 180 x (W) 36 x (D) 36 – (13mm cable Version)
External Unit (L) 180 x (W) 36 x (D) 36
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• IP Rating: IP68 when resin sealed
• Material Internal Unit:-
• Cover: PC ABS
• Base: PC ABS
• Material External Unit:-
• Cover: FR ABS
• Base: FR ABS
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
