For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

Hybrid Battery Backup Dynamic UPS (UBR)

Natural sine wave signal obtained without using semiconductor material
-%50,+%15 wide input voltage tolerance
±%5 input frequency tolerance
Up to 96% efficiency
99% harmonic suppression under all conditions
Input current harmonics below 3%
Unlimited crest factor
High short circuit resistance (14xln)
Input power factor 0.99
1 hour at 110% load, 2 minutes at 150% load
100% Galvanic isolation
650 thousand hours MTBF period
25 years operating life
Low maintenance costs
Low operating costs
40% low battery usage
Natural ventilation
Ability to provide full capacity output even at capacitive power factor
Compatible with BMS and many communication systems
Container cabin solution option
Water cooled solution option

Continuous and clean energy source dynamic uninterrupted The most important feature of power supplies is that they have a unique synchronous machine that produces natural sine wave independent of the network. UNIBLOCK-R is a model with a battery backup structure and a backup structure within itself. This product, which has a solution capacity in MV and LV conditions, is produced between 150kVA-1100kVA as a single without paralleling. UNIBLOCK_R dynamic hybrid UPS helps meet our Tier 3 and Tier 4 requirements since it provides backup from 4 separate lines in its own structure. Your critical loads will have high reliability. When you prefer UBR Dynamic UPS; needs such as compensation panel and air conditioner will be eliminated. A much more efficient, high-quality, safe and long-lasting solution will be obtained with a single system.

Under dynamic load conditions, even in sudden peak currents, the voltage generated from the network independent synchronous motor allows you to obtain a parasitic and natural sine wave at the UPS output.
The short circuit currents occurring on the load side are eliminated up to 14 times the nominal current, ensuring the continuation of selective critical load operation.
Thanks to independent grounding, there is no need for an additional isolation transformer.
Harmonic filters provide high efficiency in low areas since capacitors are not required.
UNIBLOCK-R dynamic hybrid UPSs have high earthquake standards. They are designed to withstand 1G horizontal and 0.5G vertical earthquake acceleration.
Battery life is 40% longer thanks to the use of battery operation only during power outages and much lower AC ripple.
System ventilation is provided naturally thanks to the industrial fan integrated into the UNIBLOCK synchronous machine. There is no need for an additional air conditioning system.

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

Dynamic UPS with Kinetic Energy Storage (UBT+ with PowerBridge)

Natural sinus signal obtained without using semiconductor material
-%50,+%15 wide input voltage tolerance
±%5 input frequency tolerance
Up to 97% efficiency
99% harmonic suppression under all conditions
Input current harmonics below 3%
Unlimited crest factor
High short circuit resistance (14xln)
Input power factor 0.99
Ability to work for 1 hour at 110% load and 2 minutes at 150% load
100% Galvanic isolation
MTBF period is very long
25 years operating life
Low maintenance costs
Low operating costs
40% low battery usage
Natural ventilation
Ability to provide full capacity output even at capacitive power factor
Compatible with BMS and many communication systems
Container cabin solution option
Water cooled solution option

Continuous and clean energy source dynamic uninterrupted The most important feature of power supplies is that they have a unique synchronous machine that produces natural sine waves independent of the network. UNIBLOCK-T+ with PowerBrdige is a model with a Kinetic Energy Storage structure. This product, which has a solution capacity in MV and LV conditions, is produced between 625kVA-2500kVA as a single without paralleling. When you prefer a Dynamic UPS with Kinetic Energy Storage; needs such as compensation panels and air conditioning will be eliminated. A much more efficient, high-quality, safe and long-lasting solution will be obtained with a single system.

Thanks to the three-legged shock coil called MAGIC CHOKE, it provides decoupling by suppressing current harmonics from the load to the network, isolating voltage harmonics from the network to the load and limiting short-circuit currents directed to the network.
With the POWERBRIDGE kinetic energy storage option, it provides high efficiency uninterrupted energy without using a battery group. With the 16.5MJ, 2×16.5MJ, 21MJ, 2x21MJ, 35MJ, 2x35MJ, 60MJ and 80MJ options, short interruptions are backed up by converting kinetic energy into electrical energy. The kinetic energy storage system has a unique feature with backup times of over 1 minute at full load in case of power outages.

Under dynamic load conditions, even in sudden peak currents, the voltage generated from the network independently in the synchronous motor allows you to obtain a noise-free and natural sinus at the UPS output.
The short circuit currents formed on the load side are eliminated by 14 times the nominal current, allowing the continuation of selective critical load operation.
The life of the batteries is 40% longer thanks to the use of battery operation only in power outages and much lower AC ripple.

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

Real On-Line “Double Conversion” Technology

DSP Controlled, IGBT Rectifier UPS
3 Phase Input / 3 Phase Output 10 – 400 kVA

– IGBT rectifier
– IGBT Inverter
– DSP controlled processor
– Active input power factor correction, PFC (PF 0.99)
– Active harmonic correction (THDI <%3)
– Wide input voltage range
– Eco Mode efficiency ≥%98
– Backup and power increase thanks to paralleling feature
– Smart battery charging system and Extendable battery feeding time
– Soft Start feature
– 512 event memories
– Static and manual bypass as standard

– Galvanic isolation and special voltage application options
– Communication with computer and network systems (SNMP)
– Low installation and operating costs
– Compliant with ISO 9001, ISO 14001, ISO 18001 and CE standards 2 year full warranty

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

On-Line ‘Double Conversion’ 3-Level IGBT Technology
3 Phase Input – 3 Phase Output
10 to 600 kVA

– 3-Level Rectifier & Inverter Technology
– Real Digital Signal Processor (DSP) controlled
– High Input Power Factor, PF>0.99
– High Output Power Factor PF:1
– Up to 8 parallel field connection (Optional)
– High efficiency transformerless design (%97)
– Low Input Current Harmonics
– Wide Input Voltage Range
– Multifunctional Touch Graphic LCD Screen
– Feedback Protection (Optional)
– High reliability and high performance with the help of artificial intelligence algorithms
– Standard internal Static and Manual Bypass
– Compatible operation with the generator thanks to the Soft-Start feature
– Superior communication options (SNMP, RS485-Modbus, RS232, Dry Contact)
– Up to 500 event memories
– Smart battery charging system and extendable battery feeding time
– 2-year full warranty in accordance with ISO 9001, CE, ISO 14001 standards

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.

Real On-Line “Double Conversion” Technology

DSP Controlled, IGBT Rectifier UPS
3 Phase Input / 1 Phase Output 10 – 40 kVA

– IGBT rectifier
– IGBT Inverter
– DSP controlled processor
– Active input power factor correction, PFC (PF 0.99)
– Active harmonic correction (THDI ≤%3)
– Wide input voltage range
– Compatible operation with generator
– Energy saving mode (ECOMODE)
– Backup and power increase thanks to paralleling feature
– Smart battery charging system
– Easy synchronization with external sources
– Static and manual bypass as standard
– Galvanic isolation and special voltage application options
– Communication with computer and network systems (SNMP)
– Extendable battery feeding time
– Low installation and operating cost
– Compliant with ISO 9001, ISO 14001 and CE standards 2 year full warranty

For product technical specifications and details, you can view the details by clicking on the PDF icon, download the file or send it to the address you want via e-mail.