You are here:
6933 sonuçtan 4913-4928 arası gösteriliyor
Ürünler
XLPE kabloların polietilen üzerindeki karbon tabakasını sıyırır.
Polietilen tabakayı helezon şekilde soyar.
Specification
Type: OM3 Aqua
Fibre: 12 primary coated fibres nominally 242 µm
Fibre Colours: According to TIA/EIA 598-C also in agreement with IEC 60304: Blue, orange, green, brown, grey, white, red, black, yellow, violet, pink and aqua
Strength member: Ultra high modulus Aramid yarns
Sheath: Halogen free, flame resistant thermoplastic sheathing compound acc. to EN 50290-2-27, UV stabilised, 0.4 mm
Nominal dimensions: ø3.0 mm +0.1 mm -0.3 mm
Ferrule: 12 Fibre MM Elite® ferrule, PPS
Boot colour: Black
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Type: OM4 Aqua
Fibre: 12 primary coated fibres nominally 242 µm
Fibre Colours: According to TIA/EIA 598-C also in agreement with IEC 60304: Blue, orange, green, brown, grey, white, red, black, yellow, violet, pink and aqua
Strength member: Ultra high modulus Aramid yarns
Sheath: Halogen free, flame resistant thermoplastic sheathing compound acc. to EN 50290-2-27, UV stabilised, 0.4 mm
Nominal dimensions: ø3.0 mm +0.1 mm -0.3 mm
Ferrule: 12 Fibre MM Elite® ferrule, PPS
Boot colour: Black
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Installation in an underground chamber or direct buried.
• Six splice trays are each able to accommodate 12 spliced fibres.
• Maximum spliced fibre capacity is 72 fibres.
• Between 4 and 16 cable entries dependant on cable diameter.
• Mechanical cable sealing.
• Cable anchor system allows cables to be prepared away from the
joint.
• Continuous addition of branched cables possible for up to 4 cables
per port.
• Reliable sealing of the box using a mechanical gasket allows easy
entry.
• Suitable for direct buried applications.
• Pole and Wall mounting brackets available.
• Earth point for cables metallic parts.
Technical Data
• Number of cable ports: 4 – 16 (depending on diameter)
• Maximum cable diameter (mm): 25
• Maximum number of trays: 6
• Maximum fibre capacity: 72
• Required space envelope (mm): (l) 500 x (w) 160 x (d) 90
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Closure: Glass Filled Nylon
• Splice trays: FR ABS
• Testing:-
• Closure Sealing IP68
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Drop: EN 60068-2-32
• Salt Mist: NF C 20 – 711
• Vibration: EN 60068-2-6
• Shock: EN 50 102
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The joint can be used for straight, branch spur or tee applications.
• Stainless Steel Base and Cap available in two sizes.
• The closure base has either 4 circular entry ports (2 x OPGW cable and up to
2 x Branch Cables) or 6 circular entry ports (2 x OPGW and up to 4 branch
cables).
• Insulated cable inlet for OPGW cables.
• For each type of trays, splice holders are available for crimp, heat shrinkable
or mechanical (for SEM only) splice protectors.
• All fibres are positively managed to maintain a 30mm minimum bend radius.
• Splice trays hinge upwards individually, allowing full access to spliced fibres
without disturbance to live fibres in adjacent trays.
• Splitter modules can be mounted within the joint and can be supplied preassembled. Any combination of splitters between 1×2 to 1×16 can be
accommodated. Please contact Prysmian for splitter part numbers.
• Cables up to 22 mm in diameter can be installed into each port.
• The joint is quickly re-enterable and the sealing clamp can be locked.
Technical Data
• Number of cable ports: 4 circular (2 x OPGW cable + 2 branch cables) Short Cap
6 circular (2 x OPGW cable + 4 branch cables) Long Cap
• Maximum cable diameter (mm): Ø22 (Ø14.6mm OPGW Cable, Ø22 for Dielectric Cables)
• Required space envelope (mm): (l) 560 x (d) 250 Short Cap
(l) 600 x (d) 250 Long Cap
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Installation in an underground chamber or direct buried.
• Six splice trays are each able to accommodate 12 spliced fibres.
• Maximum spliced fibre capacity is 72 fibres.
• Between 4 and 16 cable entries dependant on cable diameter.
• Mechanical cable sealing.
• Cable anchor system allows cables to be prepared away from the
joint.
• Continuous addition of branched cables possible for up to 4 cables
per port.
• Reliable sealing of the box using a mechanical gasket allows easy
entry.
• Suitable for direct buried applications.
• Pole and Wall mounting brackets available.
• Earth point for cables metallic parts.
Technical Data
• Number of cable ports: 4 – 16 (depending on diameter)
• Maximum cable diameter (mm): 25
• Maximum number of trays: 6
• Maximum fibre capacity: 72
• Required space envelope (mm): (l) 500 x (w) 160 x (d) 90
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Closure: Glass Filled Nylon
• Splice trays: FR ABS
• Testing:-
• Closure Sealing IP68
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Drop: EN 60068-2-32
• Salt Mist: NF C 20 – 711
• Vibration: EN 60068-2-6
• Shock: EN 50 102
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For the distribution of a Blown Tube cable of up to 24 tubes.
• Up to 24 single tube Blown Fibre cables can be distributed out.
• Fully removable front to allow easy access to the working area.
• Lockable front to prevent unwanted access.
• All tubes positively managed to a 50mm Ø to allow continuous blowing.
• Cables are anchored using 2 cable ties per cable.
• The cabinet is supplied with 24 x 5mm tube connectors.
• Designed for outdoor environments and fully compatible with Sirocco
Blown Fibre System.
• Cabinets are manufactured from 1.5mm galvanised steel.
Technical Data
• Number of cable ports: max 24 x 1 Tube cable or 1 x 24 Tube Cable
• Maximum cable diameter (mm): 40
• Required space envelope (mm):
Pole Mounted: (h) 720 x (w) 650 x (d) 535
Pedestal mounted: (h) 970 x (w) 650 x (d) 535
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for Blown Fibre and mini cable applications.
• Robust IP68 construction ensures suitability for direct bury applications.
• Quick release toggle clips reduce installation time and enable rapid reentry.
• Integral pressure relief valve prevents accidental over-pressurisation.
• For butt applications a plug is available to seal the unused end of the
in-line entry port.
• Can accommodate an in-line blown fibre tube cable/duct between
16.5mm and 40mm in diameter.
• Two further drop ports on each end can accommodate cables/ducts of
between 14.5mm and 24.5mm in diameter. Up to two small
cables/ducts between 10 and 11.5mm in diameter can also be
accommodated in each of these ports using a manifold. The manifold
can also be used to accommodate up to four cables into an end drop
port providing the cables are between 8 and 10mm in diameter.
• A further six drop ports (3 on each side) allow for cables/ducts between
8 and 11.5mm in diameter, or between 14.5 and 16.5mm in diameter.
• Drop cable glands are supplied separately. The closure has knock-out
ports for the glands, eliminating the need for plugs in unused ports. A
tool is available to knock-out the cable ports.
• The drop cable glands are designed to grip the cables/ducts in two
positions. This provides cable retention in both axial and lateral
directions. The glands also seal the cable/duct in two positions.
• The Tube Distribution Closure is supplied with an instruction flysheet. A
more detailed installation guide is available on request from Prysmian.
Technical Data
• Number of ports: 1×2 In-Line port, 4 End Ports, 6 Side Ports
• Blown Tube Cable Capacities:
(Based on cables containing 5mm tubes)
In-Line Port: 7, 12, 19 and 24 Blown Tube Cables
End Port: 4×1, 4, 7 and 12 Blown Tube Cables
Side Port: 1 and 4 Tube Cables
• Dimensions (mm): (l) 550 x (w) 290 x (d) 108
• Material:
Closure: GF Polypropylene (Black)
Toggles: GF Polypropylene (Orange)
Glands: Acetal (Black)
Seal: Rubber (Black)
• Testing:-
Dry heat: BS EN 60068-2-2 Test Bb
Damp heat: IEC 68-2-3
Temperature: IEC 68-2-14
Vibration: IEC 60068-2-6: 1995
Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Used for connecting two pieces of DB1 Blown Tube cable together.
• Suitable for direct bury applications.
• Sealed to IP68 using a low temperature heat shrink.
• The joint is protected using a 20mm diameter conduit.
• Standard 5-5mm tube connector is used to join the two cables together.
Technical Data
• Maximum Cable Diameter (mm): 16
• Maximum no of tube connections: 1
• IP Rating: 68
• Required space envelope (mm): (l) 250 x (Ø) 22
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line Verticasa cable of up to 13mm in diameter.
• Can accommodate drop tubes of up to 7.2mm in diameter.
• Easy to install mechanical system sealing system using Gel to provide a seal
of IP67.
• UV resistant for external use.
• Non craft sensitive and reliable.
• Re-enterable and re-usable.
Technical Data
• Maximum Cable Diameter (mm): 13 (in-line), 7.2 (drop)
• Maximum no of Cable Entries: 1 (in-line), 2 (drop)
• IP Rating: 67
• Required space envelope (mm): (l) 185 x (w) 50 x (d) 50
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The system is designed for one-man customer connection using
semi-skilled labour, thus significantly reducing the cost of subscriber
connections.
• Up to 8 pre-connectorised QUICKDR@W Lead-in Assemblies MK 3
can be individually installed into the lead-in seal ports.
• Deferred installation cost through incremental customer connection.
• Skilled labour required for initial CLJ installation in the distribution
phase. Subsequent lead-in cable connections require only minimal
training.
• The joint can be supplied with SC type adapters and pigtails preinstalled for single fibre applications, or LC type adapters and
pigtails pre-installed for dual fibre applications.
• The CLJ can also be supplied with pre-installed connectorised
passive splitters (1×8 or 1×16).
• The joint allows the storage of a continuous loop of loose tube cable
elements within the dedicated storage area at the front of the
closure.
• All fibres are positively managed to a 30mm bend radius.
• The closure base contains one oval port, eight lead-in seal ports
and two circular ports for spurs from the main cable loop.
• The CLJ closure is sealed to IP68.
• The CLJ is compatible with a range of Prysmian produced optical
cables which can be used to distribute the fibres to each unit.
Please contact Prysmian to discuss your specific requirements.
Technical Data
• Number of cable ports: 8 (Lead-in Seal), 1 (Oval), 2 (circular)
• Maximum cable diameter (mm): 7 (Lead-in Seal), 21 (Oval), 12 (circular)
• Maximum splice tray capacity: 1 (16 fibres), 1 upgrade (additional 24)
• Maximum capacity: 8 customer connection cables (1f or 2f each)
• Maximum loop capacity: 48 (4 x 12 fibre elements)
• Required space envelope (mm): (l) 300 x (w) 231 x (d) 164 (length 410mm when heat shrink applied)
• Operating temperature: -20oC to + 70oC (5 to 95% RH)
• Sealing: IP68
• Material:-
• Cap: Glass Filled Polypropylene
• Base: Glass Filled Polypropylene
• Splice tray: FR HIPS
• Testing:-
• Closure sealing: IP68 – AS60529-2004 IEC60529 Ed 2.1 2001
• Optical: Tested at 1310nm, 1383nm, 1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for 1 to 4 tube Blown Fibre applications.
• Suitable for use in ducted networks or direct-buried applications.
• IP68 rating.
• Compact size.
• The application of these joints provides a block to the longitudinal
passage of water within a cable.
• Once the resin has cured the joint can be re-entered to re-configure
the tube arrangement.
Technical Data
• Number of cable ports: 2 – 3 (depending upon configuration)
• Maximum cable diameter (mm): 25
• Maximum number of ports: 3
• Maximum tube capacity: 4
• Operating temperature: -20oC to + 60oC
• Material:-
• Joint Shells High Density Polythene
• Resin Polyurethane
• Testing:-
• Closure Sealing IP68
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
