You are here:
6933 sonuçtan 4929-4944 arası gösteriliyor
Ürünler
Features and Benefits
• Has a capacity of up to 38 splice trays.
• Can accommodate single element splice trays or customer locking splice
trays which contain several tube loops to lock the fibre elements.
• Can accommodate splitters and splitter assemblies (SASA’s).
• Splice trays hinge upwards individually, allowing full access to spliced
fibres without disturbance to live fibres in adjacent trays.
• Contains an oval port and a Loop Storage facility. The oval port can
accommodate cables up to 10mm in diameter. Cables are sealed into the
oval port using resin.
• Contains six circular ports, which can accommodate a 25mm flexible
conduit to protect the incoming blown fibre tubes. The conduit and tubes
are sealed into the ports using resin.
• All fibres are positively managed to maintain a 25mm minimum bend
radius within the joint.
• The Joint is sealed to IP68.
• Supplied in several configurations. Each type is identified by different
colour toggles so there is no need to open the closure to determine which
version is installed. See kit contents and part numbers for the different
configurations.
• For use with Blown fibre tube cables.
Technical Data
• Number of cable ports: 1 Oval (can be used for a Loop), 6 Circular.
• Maximum cable diameter (mm): 10 Oval, a 25mm conduit Circular
• Maximum number of splice trays: 38
• Required space envelope (mm): (w) 210 x (h) 560 x (d) 165.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Base & Cover : Polypropylene (Black)
• Splice trays: FR HIPS (Light Grey)
• Toggles: 20% Glass Filled Polypropylene (Orange, Green, Blue)
• Port Bungs: 20% Glass Filled Polypropylene (Black)
• Testing:-
• Closure sealing: IP68
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Small compact snap fit single piece closure for connecting ducts / tubes.
• Two 7mm ports for connecting the 7mm duct.
• One 4mm branch port for spurring of fibres through a 4mm duct.
• Can be used to cut an existing 7mm duct and re-connect it mechanically
whilst leaving the fibres passing through in tact. The required fibres can
then be accessed, retracted and spurred off into a 4mm branch duct.
• For mechanical connection only. The unit is not sealed.
Technical Data
• Required space envelope (mm): (w) 66 x (h) 36 x (d) 25 mm
• Material: Polypropylene 10% GF
• Colour: Natural (semi Transparent)
• Duct Pull Out Retention:
> 40N (7mm port)
> 15N (4mm port)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line RetractaNet cable from 10mm to 15mm in
diameter.
• Can accommodate two drop tubes / cables of up to 10mm in diameter.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• Suitable for direct buried applications.
• Impact and crush resistant.
• For underground use only.
• Non craft sensitive and reliable.
Technical Data
• Dimensions 190 x 72 x 32 mm
• Colour Black
• Material Polypropylene
• Temperature range:
• Transport and storage -10ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -20ºC to +60ºC
• Number of Cable Entries: 1 in-line, 2 Drops
• In Line Cable Diameter (mm): 10.0 to 15.0
• Drop Cable Diameter (mm): 6.0 to 10.0
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: 15 mm cable: 350 N
7 mm drop tube: 150 N
• Water immersion: IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact resistance 10 Nm @ 20 ºC, radius 200 mm
• Crush resistance 1000 N @ 20 ºC on top surface of the box
• Application area Group 1 according to EN 124, placed minimum 25 cm below surface level
Group 2 according to EN 124, placed minimum 30 cm below stone or concrete pavement
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Designed for the splicing of OPGW cables.
• The joint box can accommodate 8 splice trays with each splice able to
accommodate up to 24 splices providing a maximum capacity of 192 fibre
splices.
• The joint box can be supplied with either 2, 3 or 4 cable entries and can
accommodate cables with a diameter of up to 25mm.
• The joint box can accommodate cables with plastic sheath, OPGW with
aluminium tube (multi loose tube or single loose tube), OPGW with stainless
steel tube or OPGW with stainless steel embedded aluminium tube.
• OPGW cables are sealed into the joint box using cable glands and a heavy
walled heat shrink tube. Plastic sheathed cables are sealed using heavy walled
heat shrink tube.
• The joint box can be anchored to the tower with galvanised steel clamps,
allowing the fixation to any type of tower. It can be anchored to all types of
poles using stainless steel tape.
• The external box is made of aluminium alloy and is sealed to IP67.
• The standard colour is RAL 7042.
Technical Data
• Maximum number of cable entries: 4
• Maximum Cable Diameter (mm): 25
• Maximum number of splice trays: 8
• Maximum number of splices per tray: 24
• Maximum number of splices: 192
• IP Rating: IP67
• Required space envelope (mm): (l) 319 x (w) 219 x (d) 110.
• Operating temperature: -40oC to + 85oC
• Material:-
• Joint Box: Aluminium alloy with grey coated powder (RAL 7042)
• Fastening Structure: Aluminium and galvanised steel
• Nuts and Bolts: Stainless Steel
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Each joint is supplied with 2 pre-fitted splice trays each capable of
containing up to 48 spliced fibres.
• Each joint is supplied with 96 mini heat-shrink splice protectors.
• The closure base has 6 circular entry ports, four of them factory fitted with
5 meters of flexduct to feed through the cable fibre modules. The
maximum capacity of each flexduct is 24 Retractanet fibre modules with 2
fibres each or 12 feeder cable loose tubes 1.55 mm with 12 fibres each.
• All flexducts are sealed using adhesive lined heat-shrink sleeves. The base
entry ports are pre-shot blasted and configured with easy knock out ends,
eliminating the need for cutting and abrading.
• The joints are supplied with all of the components required to prepare,
install and store the fibres of one 96 fibre feeder cable and 3 Retractanet
cables.
• Additional flexducts can be installed into the circular ports of the joint
using Retractanet flexduct kits.
Technical Data
• Number of cable ports: 6 circular; inner port diameter 25 mm
• Maximum capacity each port: 24x Retractanet 2 fibre modules or 12x 12 fibre loose tubes 1.55 mm
• Maximum number of splice trays: 2 (48 splices each)
• Maximum fibre capacity of Joint: 96 fibre
• Required space envelope (mm): (l) 390 x (w) 231 x (d) 164
(Length = 500mm when heat shrink sleeve is installed)
• Transport and storage -10°C to + 50°C
• Installation temperature -10°C to + 50°C
• Operating temperature: -40°C to + 70°C (5 to 95% RH)
• Material:
• Cap: Polypropylene
• Base: Phenolic resin
• Splice trays: Coated aluminium
• Testing:
• Closure sealing: IP68 – BT specification LN450B
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
• Impact resistance: 10 Nm @ 20 ºC, radius 200 mm
• Crush resistance: 1000 N/10 cm @ 20 ºC on dome
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For all RetractanetXS cables and cable combinations up to 18 mm.
• Watertight IP68.
• Tension relief on RetractanetXS cable and RetractanetXS fibre modules.
• Direct buried application.
• Crush and impact resistant.
Technical Data
• Number of cable ports: Single version: 1 port on each side
Multiple version: combinations of 1, 3 or 6 ports
• Cable retention 18 mm cable: 400 N
15 mm cable: 330 N
6 mm cable: 25 N
• Fibre module retention 1.25 mm fibre module: 25 N
• Crush resistance 1000N/10 cm @ 20°C
• Impact resistance 10 Nm @ 20°C, radius 200 mm
• Water immersion IP68 (no water ingress at 5 meter water pressure for 7 days)
• Application area Group 1 in accordance with EN 124, 25 cm below surface level
• Temperature range Transport & storage: -10°C – +50°C (short term < 14 days)
+10°C - +35°C (long term)
Installation -10°C - +50°C
Processing temperature +10°C - +35°C (2 component resin)
Operation -20°C - +60°C
● Curing time Installation after 5 minutes, completely cured after 30 minutes
● Dimensions Single version: (l) 240 mm x (w) 25 mm x (d) 25 mm
Multiple version: (l) 200 mm x (w) 40 mm x (d) 40 mm
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line cable of up to 13mm in diameter.
• Ideal for the Retractanet cable range (with extractable fibre elements).
• Can accommodate four drop cables of up to 9mm in diameter.
• Has a facility to splice and hold 16 splice protectors on a dedicated splice tray.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• The closure can be-re-entered.
• Suitable for cable chamber applications.
•Impact and crush resistant.
• For use underground
• Non craft sensitive and reliable.
• Available in grey or black.
Technical Data
• Number of cable ports: 4 circular and 1 inline port
• Maximum cable diameter (mm): 13mm for the inline cable – 9mm for the drop cables
• Maximum number of splice trays: 1
• Maximum fibre capacity of Joint: 16
• Required space envelope (mm): 220 x 95 x 35mm
• Operating temperature: -25oC to + 70oC (5 to 95% RH)
• Material: Polypropylene
• Colour: Black or Grey
• Testing:-
• Closure sealing: IP68
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: IEC 61300-2-4 [4]
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
up to 24t DB or DI SiroccoXS cable.
pre-configured micro-duct cables up to 40mm.
• Drop Port can accept:
3 x DB1 SiroccoXS cables
1 x DB2 SiroccoXS cable
• Allows Individual Tube Breakout and tube re-routing.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 200 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
pre-configured micro-duct cables up to 40mm.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 100 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Universal closure for direct buried, hand hole/manhole, and pole/tower
(ADSS, OPGW) installation.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 192 splices (XOK 103 series) and 336 splices (XOK
107 series). By extension collars or splice trays for fibre ribbons the capacity
can be increased up to 1000 splices.
• A number of configurations with round and oval cable entry ports.
• A number of configurations suitable for window-cut applications.
• Heat shrink or mechanical type cable entry port seals provide excellent water
tightness and high cable pull out strength.
• Extension collars for extended capacity available.
• Non craft sensitive and reliable.
• Water tight seal to IP68.
Technical Data
• Dimensions (excl. inlet tubes): XOK 103 series: 560 x 230 x 100 mm
XOK 107 series: 560 x 230 x 140 mm
XOK A3 and A4: 560 x 230 x 140 mm
• Inner Diameter of Entry Ports: XOK 103 series: round port 20 mm, oval port 58 x 28 mm
XOK 107 series: round port 27 mm, oval port 58 x 28 mm
XOK A3 and A4: oval port 58 x 28 mm
• Material: Closure: Acid Proof Stainless Steel (AISI 316) 1.5 mm
Closure Seal: Chloroprene Rubber
• Splice Tray Capacity XOK 103 series: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
XOK 107 series: 7 trays XOKP 1024/48 with 48 splices each (336 splices)
XOK A3 and A4: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
• Temperature Variation IEC 60068-2-14; 2 cycles -30°C to +80°C: Δα <0.1 dB@1550 nm
• Damp Heat IEC 60068-2-14; + 60°C, RV 93%, 16 h: Δα <0.1 dB@1550 nm
• Climatic Withstand Test: IEC 60068-2-14; heat +85°C; RV 93%;16 h: Δα <0.1 dB@1550 nm
IEC 60068-2-14; cold -30°C; 16 h: Δα <0.1 dB@1550 nm
• Corrosion Test A Sulphur Dioxide: EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h
• Corrosion Test B Salty Mist: IEC 60068-2-52; +35°C; 1000 h
• Temperature Range:
• Transport and Storage -40ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -45ºC to +80ºC
• Fibre Bending Radius (mm) Minimum 30 mm
• Cable Retention IEC 60794-1-E1: 1000 N
• Water Immersion IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact Resistance IEC 60794-1-E4: 30 Nm @ 20 ºC, radius 300 mm
• Crush Resistance 1000 N @ 20 ºC on top surface of the box
• Torsion Resistance IEC 60794-1-E7: 1000 mm length, ± 180°: Δα <0.1 dB@1550 nm
• Drop Drop height 5 meters on concrete: Δα <0.1 dB@1550 nm
• Application Area Group 1&2 in accordance with EN 124, 30 cm below surface level
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
pre-configured micro-duct cables up to 40mm.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 50mm
• Dimensions: (L) 640 x (W) 100 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
up to 24t DB or DI SiroccoXS cable.
pre-configured micro-duct cables up to 40mm.
• Drop Port can accept:
3 x DB1 SiroccoXS cables
1 x DB2 SiroccoXS cable
• Allows Individual Tube Breakout and tube re-routing.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 200 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A joint closure for underwater use.
• The joint is used for the splicing of two cables together.
• Has a total capacity of up to 96 fusion splices.
• The closure is supplied with four splice trays each able to accommodate up to
24 fusion splices.
• Cables are sealed into the closure using heat shrink sleeves.
• The closure end blocks have a fixing system for cable armour wires.
• Supplied with a heat shrinkable cover to protect the joint from corrosion.
• The closure end blocks are made from brass and the closure cover is made
from tinned copper.
• Can be installed to depths of 150 metres.
Technical Data
• Dimensions 950mm x 145mm diameter
• Material Brass, Copper
• Maximum Capacity: 96 fusion splices
• Number of Cable Entries: 2 (1 in, 1 out)
• Maximum Diameter:
• For Optical Unit Metal Sheath: 15mm (XOK 6312); 20mm (XOK 6312K)
• Metal Armour: 32mm (XOK 6312); 36mm (XOK 6312K)
• Steel Wire Diameter: 2.5mm
• Tensile Strength (kN): 20
• Maximum Installation Depth: 150m
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Easy and quick mounting without loss of parts
• Unbreakable, corrosion resistant and resistant to most chemicals
• Stand up to tough working conditions, duct bending an pulling
• High working pressure class PN 16
• Re-usable
• UV resistant
• Vibration resistant
Technical Data
• Working pressure: All sizes maximum 16 bar
• Temperature range:
Transport & storage: -30°C – +70°C
Installation: -10°C – +50°C
Operation: -20°C – +60°C
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Push-fit operation.
• Re-enterable.
• Re-usable connector (spare covers on request).
• Transparent housing and transparent cover enables visual check on microduct
installation and on cable position.
• The housing provides increased impact resistance for direct buried installation.
• Air tight.
• Waterproof.
• Suitable for both EaseNetXS & JetNetXS systems.
Technical Data
• Straight and end stop connectors:
Microduct OD 14±0.2mm
Microduct ID <12.0mm
Pull-out force 360N
Crush resistance > 1000 N
Impact resistance > 5.0 Nm @ radius 300 mm @ -15°C to +20°C
Working pressure 16 bar @ +20°C
Leakage @16 bar < 1 cc/min
• Transport and storage -10°C to + 50°C
• Installation temperature -10°C to + 50°C
• Operating temperature: -20°C to + 60°C
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Universal closure for direct buried and hand hole/manhole installation.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 96 splices.
• In-line configuration with oval ports and reliable cable entry seals.
• Storage area for excess length of feeder cable loose tubes and Retractanet
cable Picoflex fibre modules.
• 8 cable entry ports to maximize engineering flexibility.
• Mechanical cable entry seals provide excellent water tightness.
• Non craft sensitive and reliable.
• Watertight seal to IP 68.
Technical Data
• Dimensions 560 x 230 x 100 mm
• Inner diameter cable entry ports 2 x oval port 58 x 28mm
• Material Closure: Acid proof stainless steel (AISI 316) 1.5 mm
Closure seal: Chloroprene rubber
• Splice tray capacity 2 trays XOKP 1024/48 with 48 splices each (96 splices)
• Temperature variation IEC 60068-2-14; 2 cycles -30°C to +80°C: Δα <0.1 dB@1550 nm
• Damp heat IEC 60068-2-14; + 60°C, RV 93%, 16 h: Δα <0.1 dB@1550 nm
• Climatic withstand test IEC 60068-2-14; heat +85°C; RV 93%;16 h: Δα <0.1 dB@1550 nm
IEC 60068-2-14; cold -30°C; 16 h: Δα <0.1 dB@1550 nm
• Corrosion test A sulphur dioxide EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h
• Corrosion test B salty mist IEC 60068-2-52; +35°C; 1000 h
• Temperature range:
• Transport and storage -40ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -45ºC to +80ºC
• Fibre bending radius (mm): minimum 30 mm
• Cable retention: IEC 60794-1-E1: 1000 N
• Water immersion: IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact resistance IEC 60794-1-E4: 30 Nm @ 20 ºC, radius 300 mm
• Crush resistance 1000 N @ 20 ºC on top surface of the box
• Torsion resistance IEC 60794-1-E7: 1000 mm length, ± 180°: Δα <0.1 dB@1550 nm
• Drop Drop height 5 meters on concrete: Δα <0.1 dB@1550 nm
• Application area Group 1&2 in accordance with EN 124, 30 cm below surface level
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
