Features and Benefits
• An ultra compact closure for the splicing of optical cables.
• Supplied with 12 single element trays each able to accommodate 12
splices providing a maximum capacity of 144 fibres, or 12 single circuit
splice trays. Each single circuit splice tray has two storage sections
providing a total of 24 trays per joint. Each tray can accommodate up to
4 splices providing a total capacity of 96 fibres.
• An input manifold manages the tubes to a common routing channel and
has the provision to mount up to four optical splitters.
• The joint is for use with heat shrink splice protectors of either 1.3mm in
diameter and 30mm in length or 2.2mm in diameter and 45mm in length.
• The closure base has 4 circular entry ports and an oval port. Cables up
to 23mm in diameter can be installed into each port. A further two small
ports are available as emergency ports. These ports are for heat shrink
entry and can accommodate a cable of up to 12mm in diameter.
• Circular port cables are sealed using a mechanical sealing gland. The
gland can be assembled onto the cable away from the joint and is then
simply plugged into the base.
• Oval port cables are sealed using adhesive lined heat shrink sleeves or
using a mechanical oval port entry kit. See page 3 for more information.
• Multi Way Entry Glands are available to allow the installation of a number
of cables into one circular port. See page 3 for more information.
• Splice trays hinge upwards individually, allowing full access to spliced
fibres without disturbance to live fibres in adjacent trays.
• Integrated loop storage basket for mid-span applications.
• Can be supplied with a pole/wall mounting bracket.
• Can be supplied with a pressure test valve for both flash testing and
cable earthing.

Technical Data
• Minimum Fibre Bend Radius (mm): 30 (Note: The input manifold contains mandrels to cross fibres from one side of
the stack to the other. These are limited to 20mm radius if used).
• Number of Cable Ports: 4 circular and 1 oval (also contains 2 additional small emergency ports)
• Cable Diameter Range (mm):
• Circular Port: 4 to 23
• Multi Port (in circular port): 5 to 7 (4 Way), 3x2mm flat cable (8 Way), 5 to 9 (2 Way)
• Oval Port: 7 to 21 (Heat Shrink), 5 to 14.8 (mechanical)
• Emergency Port: 4 to 12
• Cable Retention (N):
• Circular Port: > Cable (Ø/45) x 1000N with central strength member secured.
• 4 Way Multi Way (in circular port): > 150N for cables with Aramid yarns, > 30N for cables without Aramid yarns
• Maximum number of splice trays: 12 Single Element
12 single Circuit Double Trays (each tray has two storage area so 24 trays total)
• Maximum fibre capacity of Joint: 144 Single Element
96 Single Circuit
• Splitter capacity: 4 optical splitters of 4mm x 4mm x 60mm
• Required space envelope (mm): (l) 305 x (w) 231 x (d) 164
• Operating temperature: -40oC to + 70oC (5 to 95% RH)
• Material:-
• Cap: GF Polypropylene
• Base: GF Polypropylene
• Clamp: GF Nylon
• Splice Trays: FR ABS
• Testing:-
• Closure Sealing: IP68 (5 metres) (IEC 61300-2-23)
• Optical: Tested 1310nm,1550nm and 1625nm
• Change of Temperature: IEC 61300-2-22
• Dry Heat: BS EN 60068-2-2 Test Bb
• Damp Heat: IEC 60068-2-3: 1969
• Vibration: IEC 61300-2-1
• Torsion: IEC 61300-2-5
• Bending: IEC 61300-2-37
• Impact: IEC 61300-2-12
• Cable Retention: IEC 61300-2-4
• Crush Resistance: IEC 61300-2-10

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• A Distribution Box that can be pole or wall mounted.
• Sealed to IP55.
• Removable cover for easy access and fitting.
• Manufactured from UV stabilised fire resistant UL94-V0 material allowing
external installation.
• The four splice trays are hinged to enable easy access for working.
• Each splice tray can accommodate up to 12 splices.
• Customer drop cables can easily be added at a later date through the
output grommet
• The Box can be supplied with Various splitter options. Contact Prysmian
for further information.
• All fibres are positively bend managed to a 30mm minimum bend
radius.
• Input cables enter the unit from the bottom.
• Cables up to 13mm in diameter can be accommodated .

Technical Data
• Number of Splice Trays: 4
• Maximum Fibre Capacity: 48
• Maximum Input Cable Diameter (mm): 13
• Maximum No. of Input Cables: 2
• IP Rating: 55
• Max Output Cable Diameter (mm): 5mm
• Maximum No. of Output Cables: 36 (24 recommended)
• Required space envelope (mm): (w) 160 x (h) 250 x (d) 80.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box: ABS Black
• Splice tray and Insert : FR ABS White
• Testing:-
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
• Sealing: IP55

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• A large closure for optical cable splicing with two vertical tray stacks.
• Different cap lengths are available to configure the closure to the number of
trays required.
• Maximum capacity is 1344 fibres using 12 fibre single element trays.
• Capacity can be doubled to 2688 fibres using 24 fibre single element trays.
• Contains a mechanical oval port and central loop storage for up to 276 fibres
using loose tubes. (Loop capacity 3.4m of 23 elements, 2.2mmØ).
• Two input manifolds manage cable tubes to a common routing channel.
• Input manifolds enable fibres to be passed from stack to stack.
• One mechanical oval port cable entry for cables up to 18mm. Ten circular
port cable entries.
• Cables are sealed using mechanical sealing glands. Cables from 4 to 23mm
in diameter can be accommodated into each circular port.
• Multi Way Entry Glands provide alternate mechanical entry to allow up to 8
cables in each circular port.
• Can accommodate a range of splitter modules from 1×2 to 2×64.
• The closure is sealed to IP68.

Technical Data
• Required space envelope (mm): (l) 493 x (d) 310 for LMJ Short Cap (l) 600 x (d) 310 for LMJ Medium Cap
(l) 721 x (d) 310 for LMJ Long Cap
• Capacity for Single Element Management (SEM) – 12f per tray and 24f per tray)
LMJ
Short Cap
LMJ
Medium Cap
LMJ
Long Cap
Maximum number of trays 48 trays (24 + 24) 80 trays (40 + 40) 112 trays (56 + 56)
Maximum splices 576f 960f 1344f
Using 24f splice tray 1152f 1920f 2688f
LMJ
Short Cap
LMJ
Medium Cap
LMJ
Long Cap
Maximum number of trays 96 trays (48 + 48) 160 trays (80 + 80) 224 trays (112 + 112)
Maximum splices 384f 640f 896f
• Capacity for Single Circuit Management (SCM) – 4f per tray
• Minimum Fibre Bend Radius (mm): 30
• Number of Cable Ports: 10 circular and 1 oval
• Cable Diameter Range (mm):
• Circular Port: 4 to 23
• Multi Port (in circular port): 5 to 9 (2 Way), 5 to 7 (4 Way), 3x2mm flat cable (8 Way),
• Oval Port: 6 to 18
• Cable Retention (N):
• Circular Port: > Cable (Ø/45) x 500N with central strength member secured.
• 4 Way Multi Way (in circular port): > 150N for cables with Aramid yarns, > 30N for cables without Aramid yarns
• Splitter capacity: See page 4
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material:-
• Cap: GF Polypropylene
• Base: GF Polypropylene
• Clamp: GF Nylon
• Splice Trays: FR ABS

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Metallic closure units for OPGW and OPGW/FOC installations.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 144 splices. By extension collar/higher cover the
capacity can be increased.
• Heat shrink type cable entry port seals provide excellent water tightness
and high cable pull out strength.
• Non craft sensitive and reliable.
• Water tight seal to IP68.

Technical Data
• Dimensions (excl. inlet tubes) 560x230x100 mm (L x W x H)
• Inner diameter cable entry ports 20 mm
• Number of entry ports 3
• Weight about 10 kg
• Material Closure: Acid proof stainless steel (AISI 316) 1.5 mm
Closure seal: Chloroprene rubber
• Splice tray capacity 4 trays XOKP 1024/48 with max capacity of 48 splices/tray
• Temperature variation IEC 60068-2-14; 2 cycles -30°C to +80°C:  <0.1 dB@1550 nm • Damp heat IEC 60068-2-14; + 60°C, RV 93%, 16 h:  <0.1 dB@1550 nm • Climatic withstand test IEC 60068-2-14; heat +85°C; RV 93%;16 h:  <0.1 dB@1550 nm IEC 60068-2-14; cold -30°C; 16 h:  <0.1 dB@1550 nm • Corrosion test A sulphur dioxide EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h • Corrosion test B salty mist IEC 60068-2-52; +35°C; 1000 h Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• A compact closure for track and branch applications.
• Closure has four knock out ports.
• Each port accommodates a cable gland for cables 5-9mm or 6-12mm.
• Closure is supplied with two glands. Additional glands are available
separately. See additional items.
• Contains a single splice tray for up to 24 splices.
• Splice tray accommodates 2.2mm splice protectors.
• Cable management plate to secure cables and route fibres.
• Robust construction enabling direct buried applications.
• Can be used underground or can be mounted to a wall.
• Sealed to IP68 at 5m and UV resistant to ISO 4892.
• Gland available for double entry – 8 entries in total for 4-6mm cables

Technical Data
• Number of cable ports: 4 ports, 2 on each side
• Maximum capacity each port: Cables or microducts: 5-9 mm or 6-12mm
• Number of splice cassettes: 1
• Maximum splice capacity: 24
• Minimum fibre bending radius: 20 mm (fibre types ITU-T G.657 A1 and A2)
• Splice protector type: Heat shrink 45mm x 2.2 mm
• Dimensions: (l) 200 x (w) 170 x (d) 66 mm
• Colour: Black
• Material: Polypropylene housing and ABS inner parts
• UV resistance: Resistant to ISO 4892 – 1000 hours
• Temperature range:
Transport and storage -30ºC to +60ºC
Installation -10ºC to +50ºC
Operation -20ºC to +60ºC
• Cable retention: 80 N
• Impact resistance: 10 Nm @ 20 ºC, radius 100 mm
• Static load: 1000 N @ 20 ºC on top surface of the box according to EN 50411-2-3
• Water immersion: IP68 (No water ingress at 1.5 meter water pressure for 20 days)
• Application area: Group 1 according to EN 124, placed minimum 25 cm below surface level
Group 2 according to EN 124, placed minimum 30 cm below stone or concrete pavement

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.