You are here:
6933 sonuçtan 6801-6816 arası gösteriliyor
Ürünler
Features and Benefits
• Unit typically used in large business / residential premises and
can be located in Communications Room / Basement.
• Modular System allows for easy installation and system upgrade.
• Cable management within the unit ensures the minimum bend
radius for optical fibre is not exceeded.
• ‘Plug and Play’ connectors allows for easy tube routing.
• Changeable cable output plate to maximise the flexibility by
allowing a wide range of cable constructions and diameters.
• Low profile ergonomic design.
• Lockable strong Metallic construction for security purposes.
• Brush option available for the inputs and outputs to allow for
easy installation of second phase cables.
• Input gland for cable diameters ranging from 8mm to 13mm
(other sizes available on request).
• Option of single circuit or single element splice trays.
• Splitters can be fitted ranging from 1×2 up to 1×64. These can
be bought as an upgrade or pre-fitted if required.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact wall mounted unit allows installation within small spaces in
residential and business premises alike.
• Removable cover for easy access.
• Tamperproof cover security screws available as an option (refer to
optional items).
• Unit manufactured from UL94-V0 rated material.
• Kit supplied complete with all components necessary to install an in
line or butt cable.
• Customer drop cables exit the unit from the bottom. Drop cables
are secured using either rubber grommets for conventional cables,
or bulkhead connectors for Blown Fibre tube cables. Refer to
additional items.
• All fibres are positively managed to 30mm minimum bend radius.
• Capacity is up to 12 fibre.
• Cables up to 18.6mm in diameter can be accommodated.
•The box can be configured to accommodate either heat shrink splice
protectors, crimp splice protectors or mechanical splices. The correct
configuration must be ordered as the splice protector inserts can not
be re-configured in the field. Note: Splice protectors are not
supplied with the box.
Technical Data
• Number of splice trays: 1
• Maximum Fibre Capacity: 12 Fibres
• Maximum Cable Diameter (mm): 18.6
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Wall Box FR ABS Light Grey RAL 7035
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact wall mounted unit typically used for residential and small
business premises.
• Removable cover fitted with re-enterable seal. Water ingress protection
to IP55.
• Tamperproof cover security screws available as an option.
• Unit manufactured from UV resistant material.
• Standard kit supplied complete with all components necessary to splice an
external cable to four pigtails. For applications where 12 fibres are to be
spliced (external to internal cable), extra splice protectors will be required.
• Rear cable entry port allows pigtails or patchcords to enter the customer
premises, protected by 25mm diameter conduit. An internal Customer
Lead-In Unit (CLI) is supplied to manage the bend radius of the pigtails or
cable at the inside wall, refer to optional items.
• All fibres are positively managed to a 30mm minimum bend radius.
• Cable up to 13mm in diameter can be accommodated with a cable gland.
(diameters of up to 18mm can be accommodated using a cable port
adaptor).
• Cable interstices can be sealed against water/gas ingress at the entry port
if required using a quick set resin (Optional items – Sealing Resin).
• Compatible with Blown Fibre products. Note: for certain applications
where external Blown Fibre tubing is terminated, a Gas Seal connector (not
supplied) will be required to seal the tube. (see additional items).
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 12
• Maximum Cable Diameter (mm): 18
• IP Rating: 55
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box FR ABS Dark Grey RAL 7030
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact wall mounted unit used for residential, small or large business
premises.
• Removable cover for easy access.
• Tamperproof security screws available as an option (refer to optional
items).
• Unit manufactured from fire resistant UL94-V0 material.
• Single hinged splice tray enables access for working. Tray cover
provides circuit protection and contains fibre ID label.
• Pigtails exit from the bottom of the unit.
• Up to 12 SC type pigtails and adapters can be accommodated. Other
connector types are available on request. Please contact Prysmian for
further information.
• All fibre are positively bend managed to a 30mm minimum bend radius.
• Cables up to 13mm in diameter can be accommodated with a cable
gland. Diameters up to 18mm can be accommodated using a port
adapter supplied. Cables can also enter the unit through the wall.
• If external cable is terminated, cable interstices can be sealed against
the ingress of water/gas at the entry port using a quick set resin
(optional item – Sealing Resin).
• Compatible with Blown Fibre products. Note: for certain application
where external Blown Fibre tubing is terminated, a Gas Seal Connector
(not supplied) will be required to seal the tube (refer to optional items).
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 12
• Maximum Cable Diameter (mm): 18
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Internal Box FR ABS Light Grey RAL 7035
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Termination Box can be mounted internally or externally and is sealed
to IP54.
• Removable cover for easy access and fitted with a lock for enhanced
security. The unit can be supplied with a keyed lock or a plastic lock
which can be turned with a screwdriver.
• Unit manufactured from UV stabilised fire resistant UL94-V0 material
allowing external installation.
• Single hinged splice tray enables access for working. The splice tray is
supplied interchangeable inserts and can accommodate up to 8 fusion
splice protectors of heat shrink or crimp type, or 8 mechanical splices.
• Customer drop cables (patch cords) exit from the bottom of the unit and
are sealed using a split grommet. Drop cables can also be routed
through the wall.
• Up to 4 SC type pigtails and adapters or 8 LC type pigtails and adapters
can be accommodated. A splice only version is also available.
• All fibre are positively bend managed to a 30mm minimum bend radius.
• External input cable enters the unit from the bottom. Cable up to 11mm
in diameter can be accommodated .
• For Blown Fibre applications a gas block connector can be housed within
the box.
• A knock out is provided in the base of the unit for applications where the
customer drop patch cords are required to be routed through the wall
into the premises.
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 8
• Maximum Input Cable Diameter (mm): 11
• Maximum No. of Input Cables: 1
• IP Rating: 55
• Max Output Cable Diameter (mm): 3.2
• Maximum No. of Output Cables: 8
• Required space envelope (mm): (w) 140 x (h) 185 x (d) 32.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box FR ABS Grey RAL 7030
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Sealing: IP54
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 12 fibres onto an adapter
panel. SC, FC, LC, E2000 and ST connectors can be accommodated.
• Supplied with 6 single circuit splice trays. The splice trays hinge upwards to
provide access to the adapter panel. The box can be supplied with splice trays
for either heat shrink or crimp splice protectors.
• Suitable for both internal and external use. The box is rated to IP55.
• The box has two cable entry ports and one exit port for up to 12 patchcords
or cables.
• Input cables of up to 16mm in diameter can be accommodated. Input cables
are secured and sealed into the box using heatshrink sleeves.
• Output patchcords or cables exit the box through a plastic cable gland. The
gland can be used to secure a 25mm corrugated tube. The corrugated tube is
sold separately in lengths required by the customer. Please refer to addition
items.
• Mechanical cable glands can be supplied instead of heat shrink glands. These
will be fitted by Prysmian depending on the cable diameter. Please contact
the sales desk for further information.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 12 out
• Maximum cable diameter (mm): 16.0
• Maximum Capacity: 12 Fibres
• Maximum no. of customer feeds: 12
• Required space envelope (mm): (w) 270 x (h) 272 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP55
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finsh:-
• Cover: Grey RAL 7040
• Base: Grey RAL 7040
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 24 fibres onto an
adapter panel. SC, FC, LC, E2000 and ST connectors can be accommodated.
• Supplied with 12 single circuit splice trays. The splice trays hinge upwards
to provide access to the adapter panel. The box can be supplied with splice
trays for either heat shrink or crimp splice protectors.
• Suitable for both internal and external use. The box is rated to IP55.
• The box has two cable entry ports and one exit port for up to 24 patchcords
or cables.
• Input cables of up to 16mm in diameter can be accommodated. Input cables
are secured and sealed into the box using heatshrink sleeves.
• Output patchcords or cables exit the box through a plastic cable gland. The
gland can be used to secure a 25mm corrugated tube. The corrugated tube
is sold separately in lengths required by the customer. Please refer to
addition items.
• Mechanical cable glands can be supplied instead of heat shrink glands.
These will be fitted by Prysmian depending on the cable diameter. Please
contact the sales desk for further information.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 24 out
• Maximum cable diameter (mm): 16.0
• Maximum Capacity: 48 splices, 24 terminations
• Maximum no. of customer feeds: 24
• Required space envelope (mm): (w) 270 x (h) 272 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP55
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finish:-
• Cover: Grey RAL 7040
• Base: Grey RAL 7040
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Features and Benefits
• Provides the termination of an optical cable of up to 72 fibres onto
an adapter panel. SC, FC, LC, E2000 and ST connectors can be
accommodated.
• Supplied with up to 36 single circuit splice trays. The adapter panel
hinges open to provide access to the splice trays. The box can be
supplied with splice trays for either heat shrink or crimp splice
protectors.
• Suitable for both internal and external use. The box is rated to IP66.
• The box has two cable entry ports and one exit ports for patchcords
or cables.
• Input cables of up to 14mm in diameter can be accommodated.
Input cables are secured and sealed into the box using cable glands.
• Output patchcords or cables exit the box through a plastic cable
gland. The gland can be used to secure a 40mm corrugated tube.
The corrugated tube is sold separately in lengths required by the
customer. Please refer to addition items.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 1 x 40mm duct out
• Maximum cable diameter (mm): 14.0
• Maximum Capacity: 72 Fibres
• Maximum no. of customer feeds: 72
• Required space envelope (mm): (w) 400 x (h) 600 x (d) 200.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP66
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finish:-
• Cover: Grey RAL 73912
• Base: Black
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact and attractive design for internal use.
• Ability to allow cables to enter from rear, bottom or top of the
unit.
• All fibres are positively managed to maintain a 20mm minimum
bend radius.
• Can be supplied with pre-installed G657A fibre pigtails.
• Flip tray to allow access to connectorised tails and cable entry.
• Removable cover for easy access.
• Unit manufactured from fire resistant UL94-V0 rated material.
• Patchcords exit unit on bottom face via shuttered SC adapters.
• Standard colour white RAL 9016. Other colours available on
request.
• Ability to accommodate field mounted connectors by ordering
the unit with just the adapter and no pigtails.
Technical Data
• Number of input cable positions: 3
• Max input cable diameter (mm): 6mm
• Maximum Capacity: 2 Fibres
• Maximum no. of customer feeds: 2 Patchcords
• Required space envelope (mm): (l) 100 x (w) 80 x (d) 24
• Operating temperature: -40oC to + 70oC (5 to 95% RH)
• Material:-
• Base: FR ABS, White RAL 9016
• Cover: FR ABS, White RAL 9016
• Splice tray: FR ABS, White RAL 9016
• Testing:-
• Optical: Tested 1310,1550 & 1625nm
• Transportation: FT/RD/RESA/09/11/213 – 3.3
• Installation: FT/RD/RESA/09/11/213 – 3.4
• Climatic Storage: FT/RD/RESA/09/11/213 – 3.8
• Cover Resistance: FT/RD/RESA/09/11/213 – 3.10
• Impact: FT/RD/RESA/09/11/213 – 3.8
• Tensile: FT/RD/RESA/09/11/213 – 3.12
• Torsion: FT/RD/RESA/09/11/213 – 3.13
• Insertion Loss: FT/RD/RESA/09/11/213 – 3.14
• Climatic Testing: FT/RD/RESA/09/11/213 – 3.15
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The customer module can be equipped with up to 36 fibres on a splice
and patch basis for SC/PC or SC/APC type connectors.
• The operator module can be equipped with up to 36 ruggedised pigtails.
• The customer and operator modules are mechanically linked together
creating a patching channel to route the fibres with ruggedised pigtails
from one module to another.
• Depending on the building typology several customer modules can be
added on top of each other.
• In the case of a shared vertical backbone building cabling, two or more
operators can use separated operator modules to connect to the same
customer module.
• The operator module accepts loop cables for a daisy chain installation.
• A dedicated storage area is available inside the operator module for non
connected pigtails
• To limit the access to the modules, each module has two separate
doors, one for the splicing area and one for the patching area, secured
with an Allen key.
• Four Single element splicing trays also suitable for passive splitters are
available per module. For information on the unit supplied with splitters
please contact the Prysmian sales desk.
• All cables are safely secured inside each module.
• Within the modules, all fibres are positively managed to maintain a
30mm minimum bend radius.
• The customer module can accommodate a variety of different
connector types.
Technical Data
• Number of cable entries: 2 (operator module), 4 (customer module)
• Maximum cable diameter (mm): 15
• Maximum Capacity: 36 fibres (For one module. Modules can be stacked)
• Maximum no. of customer feeds: 36 (For one module. Modules can be stacked)
• Required space envelope (mm): (w) 440 x (h) 175 x (d) 102. (For one module)
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: –
• Metalwork: Mild Steel
• Plastic: FR polymer
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastic: Grey/Black
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Allows splicing from cable to cable for up to 2 fibres.
• Suitable for cables of up to 6mm in diameter.
• The compact dimensions 165 x 46 x 13 enable the MSH to be
installed along the FTTx networks where access is restricted:
riser, duct, etc…
• Hinge open cover for easy access.
• Two mechanical splices or 4 heat shrink splices protectors can be
accommodated
• Easily installed and fitted to the wall or inside a riser.
• Input/output cables are secured at the cable entry levels.
• For internal use only.
• Unit manufactured from fire resistant UL94-V0 rated material.
• The standard colour is white RAL 9016. Other colours are
available on request.
Technical Data
• Number of cable ports: 3 Input Cable – 3 Output Cable
• Maximum splice capacity: 2 fibres- mechanical splice, 4 fibres – heat shrink splice
• Maximum cable diameter (mm): 6 mm
• Required space envelope (mm): (L) 165 x (W) 46 x (D) 13
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material Internal Unit:-
• Cover: FR ABS – White RAL 9016
• Base: FR ABS – White RAL 9016
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Allows splicing from cables to cables.
• 12/24 fibre version is suitable for one inline cable of up to
12.5mm in diameter. The 48 fibre version is suitable for one
inline cable of up to 15mm in diameter.
• Up to 4 drop cables can be spliced to the in-line cable.
• The compact dimensions 100 x 80 x 32mm allow the unit to be
installed in the network where access is restricted: riser, duct,
etc…
• The cable entries are suitable for 5mm drop tubes or standard
cables from 2.5 to 5 mm OD.
• Up to 4 fusion splices or two mechanical splices can be
accommodated into the splice tray.
• Cable management within the unit ensures the minimum 20mm
bend radius for optical fibre is not exceeded.
• Easily installed and fitted to the wall or inside a riser.
• Input/output cables are secured at the cables entry levels.
• Unit manufactured from fire resistant UL94-V0 rated material.
• The standard colour is White RAL 9016. Other colours are
available on request.
Technical Data
• Maximum number of splices: 2 mechanical, 4 fusion
• Number of cable ports: 1 Input Cable – 4 Output Cables
• Maximum cable diameter (mm): 12.5 mm (12/24F), 15.0mm (48F)
• Required space envelope (mm): (L) 100 x (W) 80 x (D) 32
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material Internal Unit:-
• Cover: FR ABS – White RAL 9016
• Base: FR ABS – White RAL 9016
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact, low profile, wall mounted unit typically used in multi
dwelling units.
• Unit manufactured from fire resistant material to UL94-V0.
• Supplied with all of the components required to mount the unit
to a wall and secure an in-line Verticasa cable.
• Can accommodate Verticasa cables of up to 15mm in
diameter.
• Can take out 4 drop tubes.
• Can be supplied to accommodate drop tubes of 5mm in
diameter.
• Standard colour is white RAL9016. Other colours are available
on request. Please contact the Prysmian sales desk.
Technical Data
• Max number of input cables: 1 in-line
• Max diameter of in-line cable (mm): 15
• Max number of drop tubes: 4
• Max diameter of drop tubes (mm): 5
• Tube Retention: > 70N
• Cable Retention: > 70N
• Required space envelope (mm): (h) 120 x (w) 50 x (d) 27
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material: FR ABS
• Colour: White RAL 9016
• Flammability rating: UL94-V0
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact, low profile, wall mounted unit typically used in multi dwelling
units or office fibre cabling systems.
• Unit manufactured from fire resistant material to UL94-V0.
• Supplied with all of the components required to mount the unit to a wall
and secure an in-line Verticasa cable.
• Can accommodate Verticasa cables up to 15mm in diameter.
• Standard colour is white RAL9016. Other colours are available on
request. Please contact the Prysmian sales desk.
Technical Data
• Max number of input cables: 1 in-line
• Max diameter of in-line cable (mm): 15
• Cable Retention: > 70N
• Required space envelope (mm): (l) 90 x (w) 24 x (d) 27
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material: FR ABS
• Colour: White RAL 9016
• Flammability rating: UL94-V0
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact and Robust Internal/External wall box.
• Fitted with an integral seal providing a rating of IP55.
• Single circuit versions available for 12, 24 and 36 fibre capacities.
• Single element versions available for 48, 96 and 144 fibre capacities.
• Splice trays hinge upwards for ease of installation and maintenance.
• Lockable hinged lid for extra security.
• Can be supplied to accommodate either heat shrink splice protectors
or crimp splice protectors.
• Cable entry gland sizes range from 13mm up to 20mm.
• Up to 9 cable entry/exit points are provided.
• All fibres are positively managed to a 30mm minimum bend radius.
• Compatible with Blown Fibre products. Note: for certain applications
where external Blown Fibre tubing is terminated, a Gas Seal
connector (not supplied) will be required to seal the tube. (see
additional items).
Technical Data
• Number of Splice Trays: 4, 8 or 12 (single element): 6, 12 or 20 (single circuit)
• Maximum Fibre Capacity: 48, 96 or 144 (single element): 12, 24 or 36 (single circuit)
• Number of cable ports:
• Input cable 1 for cable with max 12.5mm diameter
• Output cables 1 for cable with max 10.5mm diameter, 6 for cable with maximum 3mm diameter
• Maximum Cable Diameter (mm): 12.5
• IP Rating: 55
• Required space envelope (mm): (w) 272 x (L) 270 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box Polycarbonate
• Splice tray: PC ABS
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact and attractive design for internal use.
• Ability to allow cables to enter from rear, bottom, top or either
side of the unit.
• All fibres are positively managed to maintain a 20mm minimum
bend radius.
• Supplied with pre-installed fibre pigtails.
• Flip tray to allow access to connectorised tails and cable entry.
• Removable cover for easy access. Cover has a transparent label
cover for identification.
• Supplied with a security screw to prevent unauthorised access.
• Unit manufactured from fire resistant UL94-V0 rated material.
• Patchcords exit unit on bottom face via two shuttered SC
adapters.
• Standard colour white RAL 9016. Other colours available on
request.
• Ability to accommodate field mounted connectors (Please contact
Prysmian to discuss your requirements)
Technical Data
• Number of input cable positions: 7
• Max input cable diameter (mm): 6mm
• Maximum Capacity: 2 Fibres
• Maximum no. of customer feeds: 2 Patchcords
• Required space envelope (mm): (l) 106 x (w) 83.5 x (d) 25
• Operating temperature: -40oC to + 70oC (5 to 95% RH)
• Material:-
• Base: FR ABS, White RAL 9016
• Cover: FR ABS, White RAL 9016
• Splice tray: FR ABS, White RAL 9016
• Testing:-
• Optical: Tested 1310,1550 & 1625nm
• Transportation: FT/RD/RESA/09/11/213 – 3.3
• Installation: FT/RD/RESA/09/11/213 – 3.4
• Climatic Storage: FT/RD/RESA/09/11/213 – 3.8
• Impact: FT/RD/RESA/09/11/213 – 3.8
• Cover Resistance: FT/RD/RESA/09/11/213 – 3.10
• Tensile: FT/RD/RESA/09/11/213 – 3.12
• Torsion: FT/RD/RESA/09/11/213 – 3.13
• Insertion Loss: FT/RD/RESA/09/11/213 – 3.14
• Climatic Testing: FT/RD/RESA/09/11/213 – 3.15
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
