You are here:
6933 sonuçtan 1281-1296 arası gösteriliyor
Ürünler
Yapı
12 adet single/multi mode optik fibere kadar ve fiberlerle birlikte su geçirmez malzemeyi de içeren termoplastik tüp ve yeterli sayıda elemanın (tüp ya da dolgu) birlikte SZ metodu ile bükülmesi ile kablo çekirdeği oluşur. Kablo özü kuru yapıdadır. Kablo çekirdeği üzerine çevresel olarak güçlendirme amaçlı glass yarn malzemesi sarılır. Kablo çekirdeğini dış etkenlerden korumak için iki tarafı da kopolimer malzeme ile kaplı koruge çelik bant zırh uygulaması yapılır. Zırhın üstüne ise siyah renkli LSOH kılıf uygulanır.
Teknik Bilgiler
– Sabit koşullardaki sıcaklığı : -30 °C, +70 °C
– Hareketli koşullardaki sıcaklığı : -10 °C, +50 °C
Kullanım Alanları
Bu çok tüplü, LSOH, zırhlı fiber optik kablolar, kanal içinde ya da direk gömülmek üzere dizayn edilmiş, harici ortam kablolarıdır.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Yapı
12 adet single/multi mode optik fibere kadar ve fiberlerle birlikte su geçirmez
malzemeyi de içeren termoplastik tüp ve yeterli sayıda elemanın (tüp ya
da dolgu) birlikte SZ metodu ile bükülmesi ile kablo çekirdeği oluşur. Kablo
çekirdeğine, uzunlamasına su geçirmezlik için suda şişen malzeme uygulanır.
Kuru kablo çekirdeği üzerine çevresel olarak güçlendirme amaçlı glass yarn
malzemesi sarılır. Glass yarn malzemenin üstüne ise siyah renkli LSOH kılıf
uygulanır.
Teknik Bilgiler
– Sabit koşullardaki sıcaklığı : -25 °C, +70 °C
– Hareketli koşullardaki sıcaklığı : -10 °C, +50 °C
Kullanım Alanları
Bu çok tüplü, LSOH kılıflı fiber optik kablolar, kanal içinde kullanılmak üzere dizayn edilmiş dahili ve harici ortam kablolarıdır.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Qualified to Telcordia GR326 and IEC 61300 standards and
RoHS compliant materials.
• Available for many different connector types such as FC, SC,
ST, E2000, LC and others on request.
• All adapters are supplied with ceramic inserts.
• Supplied in a range of different colours to match connector
type. (e.g. blue for PC, green for APC, beige for multimode).
• Both simplex and duplex adapters are available.
• Pre-installation of adaptors into OAsys Connectivity equipment
is possible. See relevant product data sheets for further
information.
Technical Data
Singlemode (1310/1550nm)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Pigtails are un-tuned. Tuned pigtails are available on request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Standard fibre type supplied is singlemode G657A1 or multimode
OM1/OM2/OM3/OM4 and OM4 plus.
• Standard length supplied is 2 metres.
• Standard cable diameter is 900 micron with easy strip buffering.
Ruggedised pigtails can also be supplied in 1.6mm, 2mm and 3mm.
Contact Prysmian for further information.
• 900 micron pigtails are supplied in sets of 6 or 12 colours as standard.
• The fibres and the buffer are both coloured to ensure ease of
identification when stripped.
• All connectors are supplied with ceramic ferrules.
• Pre-installation of pigtails into Connectivity equipment is possible. See
relevant data sheets for further information.
Technical Data
–Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
–Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Pigtails are un-tuned. Tuned pigtails are available on request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Standard fibre type supplied is singlemode G657A1 or multimode
OM1/OM2/OM3/OM4 and OM4 plus.
• Standard length supplied is 2 metres.
• Standard cable diameter is 900 micron with easy strip buffering.
Ruggedised pigtails can also be supplied in 1.6mm, 2mm and 3mm.
Contact Prysmian for further information.
• 900 micron pigtails are supplied in sets of 6 or 12 colours as standard.
• The fibres and the buffer are both coloured to ensure ease of
identification when stripped.
• All connectors are supplied with ceramic ferrules.
• Pre-installation of pigtails into Connectivity equipment is possible. See
relevant data sheets for further information.
Technical Data
Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Patchcords are un-tuned. Tuned patchcords are available on
request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC,
ST, E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Many fibre types available including singlemode G657A1 or multimode
OM1/OM2/OM3,OM4 and OM4 plus.
• Lengths available from 1 metre to 99 metres.
• Cable diameters available in 1.2mm, 1.6mm, 2mm and 3mm.
• Various sheath colours available.
• All connectors are supplied with ceramic ferrules.
• Please contact Prysmian to discuss any special patchcord requirements.
Technical Data
Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Pigtails are un-tuned. Tuned pigtails are available on request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Standard fibre type supplied is singlemode G657A1 or multimode
OM1/OM2/OM3/OM4 and OM4 plus.
• Standard length supplied is 2 metres.
• Standard cable diameter is 900 micron with easy strip buffering.
Ruggedised pigtails can also be supplied in 1.6mm, 2mm and 3mm.
Contact Prysmian for further information.
• 900 micron pigtails are supplied in sets of 6 or 12 colours as standard.
• The fibres and the buffer are both coloured to ensure ease of
identification when stripped.
• All connectors are supplied with ceramic ferrules.
• Pre-installation of pigtails into Connectivity equipment is possible. See
relevant data sheets for further information.
Technical Data
Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Prysmian Part Numbers: See below
PLC Splitters
• Full traceability and test certification supplied with each assembly.
• Splitters with up to 64 output ports can be supplied.
• Designed to meet Telcordia GR1209 and GR1221 standards.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC and others on request.
• Advanced planar technology.
• Low loss and PDL.
• Can be pre-installed into Connectivity products such as joints,
distribution cabinets and wall boxes.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact, safe, easy to handle, typically used in multi
dwelling units or office fibre cabling systems.
• The Verticasa Cable Stripping tool (VCST) special design will
expose the cable elements without any damage to the fibres.
• With the dedicated adaptors supplied, the VCST is suitable
to be used with the 12,24 or 48fo Verticasa cables, measuring
8.5mm, 12.5mm and 14.5mm in diameter.
• For use only for cables with lateral GRP strength members
embedded in the sheath.
• The VCST is suitable to perform a window on a cable or to
strip the cable at a cable butt without any length limitations.
Technical Data
• Required space envelope (mm):
for the VCST: (h) 145 x (w) 30 x (d) 30
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Used to crimp a fibre module onto the pulling rope placed inside
the Verticasa Drop Tube. Can be used for one or two fibre
module(s).
• Used to crimp the 5mm crimp ring in a customer connection kit to
grip the 2mm cable to the tube.
• The Crimp pliers head has been designed to get the best grip
between the pulling rope and fibre(s).
• The nominal diameter for the micro tube is 1.95mm OD and
1.6mm ID. The tube has a 1mm slot for ease of module insertion.
The length of the tube is 5mm.
Technical Data
• Required space envelope (mm):
for the Crimp pliers: (h) 210x (w) 70 x (d) 20
for the spare Tubes: (h) 70 x (w) 100
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Smooth bore.
• Bend limitation at a controlled radius of 30mm.
• Suitable for protection of fibre and pigtails up to 2.8mm OD.
• Crush Protection.
• Improved fibre management
Technical Data
• Outer tube Diameter: 5.0mm
• Inner Tube Diameter: 3.1mm
• Segment Spacing: 4.0mm
• Crush Resistance: > 0.5kN (measured over 100mm)
• Distortion: < 0.5mm (measured over 100mm)
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- Polypropylene
• Finish:- White (Other Colours available on request)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Low Friction anti static bore.
• Reduced Fire Hazard Tube.
• Suitable for protection of fibre and pigtails up to 3.0mm OD.
• Crush Protection.
• Improved fibre management
Technical Data
• Outer tube Diameter: 5.0mm
• Inner Tube Diameter: 3.5mm
• Crush Resistance: >0.2kN
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- LSOH UL94 V0
• Finish:- White (Other Colours available on request)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Prysmian Part Numbers: See below
FAST – Field Installable Connectors
• Quick, simple and clean solution for terminating SC connectors.
• Can be installed in less than 30 seconds, including preparation time.
• Available in SC/PC, LC/PC and SC/APC configurations.
• Dual terminating solution for 0.25mm and 0.9mm fibre diameters.
• No specialised tooling required. Connectors can be installed using
standard fibre preparation tools.
• Factory polished eliminating the need for extra materials and
reducing installation time.
• Supplied with a disposable wedge, already assembled to the main
connector housing.
• Stable optical performance is achieved through its use of V-groove
mechanical splice technology.
• The SC/PC and LC/PC connectors have an insertion loss of ≤0.4 dB,
with a return loss of ≥ 40dB for singlemode, and an insertion loss of
≤0.2 dB for multimode.
• The SC/APC connector has an insertion loss of ≤0.4 dB, with a
return loss of ≥ 65dB for singlemode, and an insertion loss of ≤0.2
dB for multimode
Technical Data
SC/PC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 40
• Ferrule: Factory Polished
Multimode
• Maximum Insertion Loss (dB): ≤ 0.2
• Minimum Return Loss (dB): N/A
• Ferrule : Factory Polished
SC/APC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 65
• Ferrule: Factory Polished
LC/PC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 40
• Ferrule: Factory Polished
Multimode
• Maximum Insertion Loss (dB): ≤ 0.2
• Minimum Return Loss (dB): N/A
• Ferrule: Factory Polished
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Low Friction tube with an anti static bore.
• Supplied with a pulling rope pre-installed for easy fibre
installation.
• Tube plugs are available to ensure access to the pulling
rope when cutting the drop tube into lengths.
• Available in internal and external formats. External
format is the internal tube with an extra polyethylene
sheath. See data sheet AC018.
• Reduced Fire Hazard Tube.
Technical Data
• Outer tube diameter: 5.0mm
• Inner tube diameter: 3.5mm
• Maximum Tensile: 80N
• Crush Rating: 0.4kN
• Impact: 1J
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- LSOH UL94 V0
• Finish:- White
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
